TryKeep Maximum Signal Frequency (Hz) at 3400, then raise Oversampling Factor (x Nyquist rate) from 1.2.
ObserveThe starting minimum is 6.80 kHz, while the practical rate is 8.16 kHz with a 122.55 us sample period. A larger factor increases the practical rate and shortens that period.
ExplainMaximum Signal Frequency (Hz) is doubled for the Nyquist minimum, then multiplied by Oversampling Factor (x Nyquist rate); the reciprocal practical rate gives the sample period.
Technical boundaries. The estimate assumes the entered frequency bounds the signal to retain. Its recommendation depends only on the oversampling factor, with no calculation of filter attenuation, ADC throughput or actual aliasing.
Nyquist Sampling Rate Calculator
Enter the highest signal frequency that you want to retain. Predict the minimum sampling rate, then check the result. In practice sample above that limit and filter unwanted higher frequencies before the ADC.
viewof nyquist_fmax = Inputs.range([1,100000], {value:3400,step:1,label:"Maximum Signal Frequency (Hz)"})viewof nyquist_oversample = Inputs.range([1.0,5.0], {value:1.2,step:0.1,label:"Oversampling Factor (x Nyquist rate)"})