viewof motor_current_a = Inputs.range([0.1, 10], {value: 2, step: 0.1, label: "Motor Current (A)"})
viewof rds_on_mohm = Inputs.range([5, 500], {value: 50, step: 1, label: "Assumed Rds(on) (mΩ)"})
viewof thermal_res = Inputs.range([10, 200], {value: 62.5, step: 0.5, label: "Thermal Resistance (°C/W)"})
viewof ambient_temp = Inputs.range([0, 60], {value: 25, step: 1, label: "Ambient Temperature (°C)"})MOSFET Thermal Calculator
MOSFET Thermal Calculator
animation
electronics
Try Use Motor Current (A) of 2, Assumed Rds(on) (mΩ) of 50 and Thermal Resistance (°C/W) of 62.5, then vary current.
Observe At Ambient Temperature (°C) of 25, the initial results are 0.100 V drop, 200.0 mW loss and 37.5 °C junction temperature.
Explain Motor Current (A) is squared and multiplied by resistance to obtain loss; thermal resistance converts that loss into a rise above ambient.
Technical boundaries. The estimate assumes the entered on-resistance remains constant and applies a steady thermal resistance. PWM duty cycle and drain-transition losses are absent, and the fixed 150 °C comparison is not a device-specific rating.
TipExplore: MOSFET Thermal Calculator
The power dissipation formula () estimates conduction loss when the on-resistance is known at the applied gate voltage. Adjust the parameters below to explore conditional scenarios; the calculator does not include PWM duty cycle or drain-transition losses.