MOSFET vs BJT Power Loss

MOSFET vs BJT Power Loss

animation
electronics
Try Leave Load current (A) at 0.5, MOSFET Rds(on) (ohms) at 0.022 and BJT Vce(sat) (V) at 0.3.
Observe The MOSFET result rounds to 0.005 W and the BJT result is 0.150 W; the comparison names MOSFET with a 27.3x ratio.
Explain MOSFET loss squares Load current (A) before multiplying by resistance; BJT loss multiplies the same current by its fixed voltage drop.

Technical boundaries. This comparison assumes constant on-state resistance and saturation voltage. Switching and drive losses are excluded, and the fixed dissipation messages do not calculate package or ambient temperature.

TipMOSFET vs BJT Power Loss

This calculator compares only on-state conduction loss for the chosen current, MOSFET resistance, and BJT voltage drop. It omits switching, gate-drive, and base-drive losses, so its winner is not necessarily the cooler device. Its fixed heatsink messages are rough prompts, not thermal conclusions: check each package, mounting, ambient temperature, duty cycle, and data sheet.

Back to the chapter