viewof supply_voltage = Inputs.range([1.8, 12], {value: 3.3, step: 0.1, label: "Supply Voltage (V)"})
viewof led_forward_voltage = Inputs.range([1.0, 4.0], {value: 2.0, step: 0.1, label: "LED Forward Voltage (V)"})
viewof led_current_ma = Inputs.range([1, 100], {value: 20, step: 1, label: "Desired LED Current (mA)"})LED Resistor Calculator
LED Resistor Calculator
animation
electronics
Try Open with 3.3 V on Supply Voltage (V), 2.0 V on LED Forward Voltage (V) and 20 mA on Desired LED Current (mA); then increase the desired current.
Observe The default result needs 65.0 Ω exactly and selects 68 Ω from E12. That choice gives 19.1 mA and 24.9 mW of resistor heat.
Explain Supply Voltage (V) minus LED Forward Voltage (V) gives the resistor voltage, which is divided by the desired current before rounding up to E12.
Technical boundaries. Sizing assumes a constant LED voltage and searches a finite E12 list from 10 Ω to 820 kΩ. The power warning uses a fixed 250 mW limit; component tolerances are not included.
LED Resistor Calculator
Enter supply voltage, LED voltage, and desired current to estimate a series resistor. Then check worst-case voltage, LED current, GPIO limits, and resistor power. A regulated current driver is another option.