Gamma Correction Calculator

Gamma Correction Calculator

animation
electronics
Try Hold Desired Brightness (%) at 50 and lower Gamma Value from 2.2 toward 1.0.
Observe At the default 50% request, the linear code is 128 and the corrected code is 55. The corrected bar grows toward the linear bar as gamma approaches one.
Explain Desired Brightness (%) is divided by 100, raised to Gamma Value, multiplied by 255 and rounded to obtain the corrected code.

Technical boundaries. The mapping assumes an 8-bit output scale and permits gamma from 1.0 to 3.0. The bars represent code magnitudes; no measured LED response or driver behaviour enters the calculation.

Gamma Correction Calculator

Gamma is the exponent that bends the mapping from a requested brightness to a digital output. Here gamma 1 gives a linear mapping. For an input between zero and full scale, a larger gamma produces a smaller code, especially at low levels. Change the input and gamma, then compare the result with the linear code. The actual light response also depends on the LEDs and driver.

Back to the chapter