RSSI Smoothing and Zones: Checkpoint Recaps

RSSI Smoothing and Zones: Checkpoint Recaps

TipRadio Remi, Wireless and radio domain expertCheckpoint: RSSI Smoothing and Zones

You now know:

  • The chapter’s zone boundaries are immediate above -55 dBm, near from about -55 dBm to -70 dBm, and far below -70 dBm.
  • EMA smoothing uses smoothed_rssi = alpha * new_rssi + (1 - alpha) * prev_smoothed, so lowering alpha from 0.3 to 0.1 smooths more but slows response from about 10 seconds to about 30 seconds at 1 Hz.
  • RSSI can vary by multipath, body shadowing, antenna orientation, and environment, so BLE proximity evidence should defend broad zones rather than exact meters.
TipRadio Remi, Wireless and radio domain expertCheckpoint: Deployment Trade-Offs

You now know:

  • The retail pattern combines a 2 seconds scan interval, -75 dBm filter, alpha 0.2, -55 dBm and -70 dBm zone boundaries, and 3 consecutive samples before assigning a zone.
  • For a 1000 mAh beacon advertising at 1 Hz, the chapter’s arithmetic gives 0.576 mAh/day and about 1,736 days from advertising alone.
  • Raising the rate to 10 Hz improves responsiveness but cuts the advertising-only estimate to about 174 days, so gateway-side smoothing is often the better maintenance choice.

Back to the chapter