BLE RSSI Filter Simulator

BLE RSSI Filter Simulator

animation
bluetooth
ble
Try Leave Number of Devices at 8 and Scan Duration (s) at 15, then raise RSSI Threshold (dBm) from -70 to -60.
Observe At the defaults, 5 of 8 devices pass and their rows are green. Raising RSSI Threshold (dBm) to -60 leaves 4 passing devices.
Explain A device passes when its signal is greater than or equal to RSSI Threshold (dBm). Number of Devices and Scan Duration (s) determine the generated signal values.

Technical boundaries. The simulation generates repeatable readings from device count and duration; Scan Duration (s) changes the generated data without running a timed scan. Each distance estimate assumes a calibration of -59 dBm and a path loss exponent of 2.5 in d = 10^((-59 - RSSI)/(10 × 2.5)).

NoteTry It: BLE RSSI Filter Simulator

Adjust the RSSI threshold and observe which simulated BLE devices pass the filter. Devices with RSSI below the threshold are filtered out as too distant.

Back to the chapter