BLE Mesh TTL and Propagation Calculator

BLE Mesh TTL and Propagation Calculator

animation
bluetooth
protocols
Try Set Max Node Distance (m) to 80 and Relay Spacing (m) to 10. Keep Per-Hop Delay (ms) at 10 and Safety Multiplier at 2.
Observe Watch the three result cards: the defaults give Min Hops Needed of 8, Recommended TTL of 16, and Illustrative Hop Budget of 160 ms.
Explain The calculator rounds distance divided by relay spacing up to get 8 hops, then rounds hops times Safety Multiplier up to get TTL 16. Multiplying that TTL by the 10 ms per-hop delay gives the 160 ms budget.

Technical boundaries. This estimate assumes uniform relay spacing and the same delay for every hop, without simulating actual paths or retransmissions. The calculated TTL is capped at 127, and Safety Multiplier offers only 1.5, 2.0, or 2.5.

NoteInteractive: BLE Mesh TTL and Propagation Calculator

Configure the geometric assumptions to get a candidate TTL and illustrative hop-delay budget; measured paths and retransmissions still determine delivery.

Back to the chapter