Hands-On Lab: BLE Mesh with nRF Connect

Hands-On Lab: BLE Mesh with nRF Connect

animation
bluetooth
protocols

Try it yourself using the free nRF Mesh app:

  1. Download: nRF Mesh (iOS/Android) from Nordic Semiconductor
  2. Get hardware: 3x nRF52840 DK boards (DigiKey listed $48.95 each on 2026-10-08) or use nRF52 dongles.
  3. Flash mesh firmware: Nordic provides pre-built examples

Lab Steps:

  1. Flash mesh_light example to two boards (these become light bulbs)
  2. Flash mesh_light_switch to one board (this becomes the switch)
  3. Open nRF Mesh app and provision all three devices
  4. Create a group address and bind the switch and lights to it
  5. Press the switch button - both lights should respond!

Learning Objectives:

  • Experience provisioning workflow
  • Understand group addressing
  • See managed flooding in action
  • Measure latency and reliability

No hardware? Try the Nordic Mesh Simulator online.

Back to the chapter