ObserveWatch Total sensors, Daily savings, and Payback period after pressing Calculate.
ExplainDescribe how Cellular cost (EUR/MB) affects Payback period after pressing Calculate.
Technical boundaries. The illustrative fleet uses 3 sensors per display case, 2880 readings per day, and 8 bytes per reading. It applies a fixed modeled reduction and EUR 120 gateway cost per store.
viewof danfossStores = Inputs.range([1000,100000], {value:40000,step:1000,label:"Number of stores"})
viewof danfossCasesPerStore = Inputs.range([4,24], {value:12,step:1,label:"Display cases per store"})
html`<div style="background: var(--bs-light, #f8f9fa); padding: 1rem; border-radius: 8px; border-left: 4px solid #E67E22; margin-top: 0.5rem;"><p><strong>Total sensors:</strong> ${danfossSensors.toLocaleString()}</p><p><strong>Raw data/day:</strong> ${(danfossRawMB /1000).toFixed(1)} GB (${danfossRawMB.toFixed(0).toLocaleString()} MB)</p><p><strong>Raw cellular cost/day:</strong> EUR ${danfossRawCost.toFixed(0).toLocaleString()}</p><p><strong>After edge in this illustrative fleet (modeled 95.6% reduction by record count):</strong> EUR ${danfossEdgeCost.toFixed(0).toLocaleString()}/day</p><p><strong>Daily savings:</strong> EUR ${danfossSavings.toFixed(0).toLocaleString()}</p><p><strong>Fleet gateway investment:</strong> EUR ${danfossFleetGatewayCost.toLocaleString()} (${danfossStores.toLocaleString()} x EUR ${danfossGatewayCost})</p><p><strong>Payback period:</strong> ${danfossPaybackDays.toFixed(1)} days</p></div>`
Key Insight: The three sensor types in the same deployment use three different edge patterns. Temperature uses Filter (only exceptions matter), defrost uses Filter (only state changes matter), and compressor current uses Aggregate (trend data matters). Pattern selection is per-sensor, not per-deployment.