Stepper Reliability Exercises
Stepper Reliability Exercises
animation
actuators
stepper
Try In Code Challenge, choose the coil sequence and repeating index from the dropdowns, then press Check Code.
Observe Check Code reveals which selections match the stored answers and shows corrections for wrong choices.
Explain Check Code compares the selected text with the answer key; the accepted index repeats the four coil patterns using a remainder.
Technical boundaries. The exercise assumes the supplied answer key defines correctness; it does not run the Python or measure a motor. The example fixes GPIO pins to 19, 18, 5 and 17 and gives the step function a default delay of 5 ms.
Tip
Checkpoint: Reliability Evidence
Checkpoint: Reliability Evidence
You now know:
- Current limiting is not a one-time datasheet copy: the chapter recommends starting around 70-80% of rated current and checking motor temperature after 30 minutes.
- Precision failures accumulate because the controller can miss steps without knowing it unless homing, limit switches, or encoder evidence reset the count.
- The lab tests the geared 28BYJ-48 from 1 RPM through a tentative 10 RPM under load, comparing commanded and measured speed; acceleration does not make 100–1,000 RPM feasible.