Acceleration Profile Calculator

Acceleration Profile Calculator

animation
actuators
stepper
Try Start with Total Steps to Move at 80000, Max Speed (steps/s) at 1000, and Acceleration (steps/s²) at 500.
Observe The default move is Trapezoidal: acceleration takes 2.00 s and Total Time is 82.00 seconds.
Explain Acceleration (steps/s²) sets the ramp time by dividing the target speed by acceleration; equal acceleration and braking ramps surround any constant-speed section.

Technical boundaries. The calculation assumes constant acceleration and equal braking strength. If the distance is too short, peak speed becomes the square root of acceleration times total steps; torque limits and missed steps are not modelled.

Back to the chapter