Actuator Safety Review

Actuator Safety Review

An actuator is a device that changes the physical world. Firmware is stored device software. Name the moving part, people and equipment within reach, safe resting state, energy source, hardware limit, manual stop, position evidence, and owner of recovery. Put the highest-consequence stop outside the ordinary software path.

Jam the motion, remove position feedback, freeze the firmware, lose communication, interrupt power, and restart. Check that energy is limited or removed, the mechanism reaches or reports a safe state, repeated commands do not create new motion, and the operator can tell a stopped system from a completed action.

In Figure 4 in the chapter, identify the axial leads and the marked cathode end, then map them to a single-polarity DC coil in the protection circuit. When that driver opens, stored magnetic energy drives current through this local loop instead of forcing a destructive voltage across the transistor or GPIO.

Back to the chapter