Try It: OLED Display Memory and Power Estimator
Try Keep Display Width (px) at 128 and Display Height (px) at 64, then change Pixel Fill (%) from 50 to 100.
Observe At the opening settings, Frame Buffer is 1,024 bytes and estimated current is 25.1 mA. Raising Pixel Fill (%) increases current without changing buffer size.
Explain Pixel Fill (%) sets how many pixels are lit; current adds 0.006 mA per lit pixel to a 0.5 mA baseline, while the buffer stores one bit per pixel.
Calculate display budget
Reset
Technical boundaries. The estimate assumes a fixed 3.3 V supply and 520 KB of ESP32 RAM. Full-frame transfer times use 400 kHz for I2C or 10 MHz for SPI without protocol overhead.
viewof oled_width = Inputs. select ([128 , 64 , 96 ], {value : 128 , label : "Display Width (px)" })
viewof oled_height = Inputs. select ([64 , 32 , 128 ], {value : 64 , label : "Display Height (px)" })
viewof oled_fill_percent = Inputs. range ([0 , 100 ], {value : 50 , step : 5 , label : "Pixel Fill (%)" })
viewof oled_interface = Inputs. radio (["I2C" , "SPI" ], {value : "I2C" , label : "Interface" })
oled_total_pixels = oled_width * oled_height
oled_buffer_bytes = Math . ceil (oled_total_pixels / 8 )
oled_buffer_kb = (oled_buffer_bytes / 1024 ). toFixed (2 )
oled_lit_pixels = Math . round (oled_total_pixels * oled_fill_percent / 100 )
oled_current_ma = 0.5 + (oled_lit_pixels * 0.006 )
oled_power_mw = oled_current_ma * 3.3
oled_i2c_speed = oled_interface === "I2C" ? 400 : 10000
oled_refresh_ms = oled_interface === "I2C" ? (oled_buffer_bytes * 8 / (400000 ) * 1000 ). toFixed (1 ) : (oled_buffer_bytes * 8 / (10000000 ) * 1000 ). toFixed (2 )
oled_esp32_ram = 520
oled_ram_percent = (oled_buffer_bytes / (oled_esp32_ram * 1024 ) * 100 ). toFixed (1 )
html `<div style="background: var(--bs-light, #f8f9fa); padding: 1rem; border-radius: 8px; border-left: 4px solid #E67E22; margin-top: 0.5rem;">
<div style="display: grid; grid-template-columns: 1fr 1fr; gap: 0.75rem;">
<div>
<p style="margin: 0.2rem 0; font-weight: bold; color: #2C3E50;">Display Properties</p>
<p style="margin: 0.2rem 0;"><strong>Resolution:</strong> ${ oled_width} x ${ oled_height} = ${ oled_total_pixels. toLocaleString ()} pixels</p>
<p style="margin: 0.2rem 0;"><strong>Frame Buffer:</strong> ${ oled_buffer_bytes. toLocaleString ()} bytes ( ${ oled_buffer_kb} KB)</p>
<p style="margin: 0.2rem 0;"><strong>ESP32 RAM Usage:</strong> ${ oled_ram_percent} % of ${ oled_esp32_ram} KB</p>
</div>
<div>
<p style="margin: 0.2rem 0; font-weight: bold; color: #2C3E50;">Power Estimate</p>
<p style="margin: 0.2rem 0;"><strong>Active Pixels:</strong> ${ oled_lit_pixels. toLocaleString ()} of ${ oled_total_pixels. toLocaleString ()} </p>
<p style="margin: 0.2rem 0;"><strong>Est. Current:</strong> ${ oled_current_ma. toFixed (1 )} mA @ 3.3V</p>
<p style="margin: 0.2rem 0;"><strong>Est. Power:</strong> ${ oled_power_mw. toFixed (1 )} mW</p>
</div>
</div>
<div style="margin-top: 0.75rem; padding-top: 0.5rem; border-top: 1px solid #ddd;">
<p style="margin: 0.2rem 0;"><strong>Interface:</strong> ${ oled_interface} @ ${ oled_interface === "I2C" ? "400 kHz" : "10 MHz" } </p>
<p style="margin: 0.2rem 0;"><strong>Min. Transfer Time:</strong> ${ oled_refresh_ms} ms per full frame refresh</p>
<p style="margin: 0.2rem 0;"><strong>Max Theoretical FPS:</strong> ${ Math . floor (1000 / parseFloat (oled_refresh_ms))} fps ${ oled_interface === "I2C" && oled_total_pixels > 4096 ? '<span style="color: #E67E22;">(I2C may bottleneck -- consider SPI for animations)</span>' : "" } </p>
</div>
<p style="font-size: 0.85em; color: #7F8C8D; margin-top: 0.5rem;"><em>OLED power consumption is proportional to lit pixels -- a mostly-dark display uses significantly less power than a fully-lit one. Each lit pixel draws approximately 6 uA at typical brightness.</em></p>
</div>`
Back to the chapter