TryKeep Inductance (mH) at 100 and Current (mA) at 80, then increase Switch-off time (μs) from 1.
ObserveThe opening values show 8000 V of flyback voltage and 0.32 mJ of stored energy. Slower switch-off lowers the voltage while leaving the energy unchanged.
ExplainInductance (mH), converted to henries, times current divided by switch-off time gives the flyback voltage magnitude; half the inductance times current squared gives stored energy.
Technical boundaries. The calculation assumes the entered current falls to zero over the entered interval. It reports an unclamped voltage magnitude and compares it with a fixed 60 V threshold; it does not simulate diode clamping.
TipPutting Numbers to It
A relay coil with L=100 mH carrying 80mA switches off in 1 μs. The induced voltage is V=−LdtdI=−0.1×0.0000010.08=−8000 V (negative indicates reverse polarity). Without a flyback diode, this punches through the transistor’s 60V rating instantly. The stored energy E=21LI2=21×0.1×0.082=0.32 mJ must dissipate somewhere. A 1N4148 diode clamps voltage to ~0.7V, dissipating the energy safely over ~10 ms as heat: Pavg=E/t=0.32/0.01=32 mW.