← Back to the chapter

Technical detail · NFC Protocols: Mode Foundations

Why the NFC rates divide the field clock

A 13.56 MHz field has a 22.1 m free-space wavelength and a 3.52 m reactive near-field boundary. Dividing its clock by 128 gives 105.9 kbps, by 64 gives 211.9 kbps, and by 32 gives 423.8 kbps: the familiar 106, 212, and 424 kbps rates. A generous 1 MHz, 30 dB Shannon screen is 9.97 Mbps, showing that NFC deliberately operates far below that ceiling.

The data-rate discussion rests on the carrier and coupling mechanism, not just three memorised numbers. Inspect Figure 4 to place the labelled 13.56 MHz reader beside the tag’s Antenna coil before following the protocol timing.

Diagram of NFC reader-to-tag magnetic field coupling: a contactless reader's coil generates a magnetic field that loops through a nearby tag's antenna coil and microchip, with a callout explaining that this is transformer-like coupling rather than a propagating radio wave.
The reader coil’s 13.56 MHz magnetic field couples to the nearby tag’s antenna coil. A passive tag harvests energy and responds through load modulation, using transformer-like near-field coupling.

Read Figure 4 from the magnetic field (near-field coupling) between the reader and Contactless Card / Tag to its explicit conclusion, Like a transformer, not a radio link. A passive tag harvests energy from that overlapping field and replies by load modulation rather than launching an independent travelling wave. That physical account connects back to the chapter’s rates: the protocol’s subcarrier and coding choices are organized around the 13.56 MHz field, while successful operation still depends on coil overlap and coupling.

← Back to the chapter