← Back to the chapter · Previous detail

Technical detail · Hardware Components: Selection Evidence

Parallel pull-ups and directional antenna gain

dBm expresses power relative to one milliwatt. An ideal isotropic antenna radiates equally in all directions; it is a reference, not a physical antenna. dBi compares gain in one direction with that reference. EIRP combines accepted transmitter power, feed loss, and antenna gain to describe the equivalent power in that direction.

A device sinks current when it pulls a signal line low and draws current through the pull-up resistors. Its sink-current rating states a limit for that current under specified conditions. Compare the combined pull-up current with the exact device rating.

Three identical 10.0 kΩ pull-ups in parallel make Req=10.0/3=3.33R_{eq}=10.0/3=3.33 kΩ. On a 3.30 V bus they demand 0.990 mA, or 33.0% of a 3.00 mA sink rating. Separately, with no feed loss, 14.0 dBm through a 2.15 dBi antenna gives 16.15 dBm EIRP, 1.64 times the EIRP in that direction compared with a 0 dBi antenna, assuming equal accepted transmitter power and feed loss.

← Back to the chapter · Previous detail