← Back to the chapter · Next detail →

Technical detail · Why Bridge Protocols in IoT

Telephone bridges separate signaling from media

A telephone bridge links the public switched telephone network (PSTN), which uses phone circuits, to voice over IP (VoIP), which sends packets. A PSTN–VoIP gateway pairs a signaling gateway with a media gateway. Call signaling sets up and ends calls; voice media carries the sound.

On the circuit side, Signaling System 7 (SS7) carries call-control messages between telephone exchanges. Integrated Services Digital Network (ISDN) provides digital access and call control for a line. On the IP side, Session Initiation Protocol (SIP) and H.323 set up and manage calls. The signaling gateway maps the call-control events between these systems.

On the voice path, calls share a circuit through assigned time slots, called time-division multiplexing (TDM). The real-time transport protocol (RTP) carries voice in timed network packets on the IP side. The media gateway converts between these paths.

These paired paths explain why one bridge may require different translation, delivery, and failure rules for control and payload traffic. Keep the same source, translation, target, and evidence boundary in the IoT design record: name both contracts, stale-data behavior, command owner, and proof required before release.

← Back to the chapter · Next detail →