โ† Back to the chapter

Technical detail ยท Sensor Protocol Review for Gateway Translation

Prove byte order and bus timing

For a value spanning several bytes or registers, byte order within a word and word order are separate choices. Record both, along with signedness: whether the value represents negative as well as positive numbers. Decode a raw sample whose true value is known. If it differs, compare the raw bytes with the map before trusting other readings.

A wrong order can produce a plausible number inside an allowed range. A range check may therefore miss the error even though a failed read would be visible. Compare raw register words with the expected decoded value. A matching test vector supports this specific register mapping; it does not establish that every device model uses the same layout.

Before decoding a sample from a shared serial bus, record who starts the transaction and how each device is addressed. Define frame format, timeout, and retry rules. If two devices drive the line at once, frames can be lost or damaged. Keep raw frames so a reviewer can trace the fault.

After decoding, keep measurement time apart from gateway read time when both are known. Set the freshness limit, poll rate, and timeout. Mark an old value stale rather than presenting it as a new reading, and define what evidence returns quality to good after a fault.

โ† Back to the chapter