Technical detail · Sensor Selection: Requirements and Candidate Screening
Vibration monitoring: sampling and mounting evidence
23.5.3 Vibration Monitoring Asset
A predictive-maintenance node needs more than “an accelerometer with high resolution.” Sampling jitter is small timing variation between intended samples; too much can distort vibration measurements. Dynamic range is the span from the smallest useful vibration to the largest signal the sensor can capture without clipping. Fixture resonance is a mounting fixture’s tendency to amplify vibration near its natural frequency, making the sensor report motion created by the test setup. Check these alongside bandwidth, noise, mounting stiffness, temperature, cable behavior, timestamp alignment, and whether the MCU can move samples without dropping data. An ADXL355-class low-noise accelerometer may suit some tasks, but the release claim still depends on target-machine measurements and traces from the actual sampling path.