Skip to content

Check: Feedback and loads

Knowledge check · self-test

Check: Feedback and loads

Review feedback channels, PWM, and electrical evidence.

Back to the chapter →

Review feedback channels, PWM, and electrical evidence.

::: {.callout-tip} ## Motor Max, Actuation and safe-control domain expertCheckpoint: Alert Selection {.depth-l0} You now know: - Passive buzzers need an audio-frequency waveform; active buzzers make their own fixed tone when powered. - Alert tones usually target 1000-3000 Hz, while lower tones around 500 Hz can be useful where hearing protection changes perception. - Critical states should use more than one channel when people may not be watching the device or may not hear it reliably. :::

Back to Visual and Audio Actuators: Displays and Buzzers: Separate Waveform Timing From Strip Power