
Knowledge check · self-test
Check: Cycle Budgets and Buffering
Review Cycle Budgets and Buffering.
Review Cycle Budgets and Buffering.
**Question 1:** A battery-powered environmental monitoring node uses an ESP32 with BME280 sensor, transmitting readings every 15 minutes via Wi-Fi. Current consumption is: sensor read 30mA (3 seconds), Wi-Fi TX 170mA (2 seconds), deep sleep 10uA. Using a 2000mAh battery, approximately how long will the node operate?
**Answer:** **Approximately 170 days (5.7 months)**
**Calculation:**
- Sensor Read Energy: 30mA x (3/3600)h = 0.025 mAh per cycle
- Wi-Fi TX Energy: 170mA x (2/3600)h = 0.094 mAh per cycle
- Sleep Period Energy: 0.01mA x (895/3600)h = 0.0025 mAh per cycle
- Total per 15-minute cycle: 0.12 mAh
- Cycles per day: 96
- Daily consumption: 96 × (0.025 + 0.0944 + 0.00249) = 11.70 mAh/day (sleep included)
- Battery life: 2000mAh / 11.7 mAh/day = 171 days**Question 2:** What is the most effective way to extend battery life by 3x or more for the node described above?
**Answer:** **Reduce Wi-Fi transmissions by buffering multiple readings**
Wi-Fi transmission dominates this modeled power budget (about 78% of daily charge). By buffering 8 readings and transmitting every 2 hours instead of every 15 minutes:
- Wi-Fi transmissions drop from 96 to 12 per day (87.5% reduction)
- Daily energy drops from 11.7 to 3.77 mAh (sensor: 2.4, TX: 1.1, sleep: 0.24)
- Battery life extends from 171 days to 530 days (3.1x improvement)
Other options (ESP8266, larger battery, reduced sampling) provide smaller improvements.
Back to Low-Power Sensors: Duty Cycles and Fusion: Account for the Whole Cycle