Check: GPIO Load Safety

Knowledge check · self-test
Check: GPIO Load Safety
You now know: - A 3.3 V GPIO with a 12 mA limit cannot drive a 200 mA motor directly, so the transistor stage supplies the load current. - With beta=100, 2 mA and 1.3k ohm are only active-region estimates for the 200 mA motor example; use the data-sheet forced ratio and GPIO limit to select a switch. - LED resistors use the same discipline: 5 V, 3.2 V, and 20 mA gives 90 ohms, with 100 ohms as the nearest safe standard value.
You now know: - A 3.3 V GPIO with a 12 mA limit cannot drive a 200 mA motor directly, so the transistor stage supplies the load current. - With beta=100, 2 mA and 1.3k ohm are only active-region estimates for the 200 mA motor example; use the data-sheet forced ratio and GPIO limit to select a switch. - LED resistors use the same discipline: 5 V, 3.2 V, and 20 mA gives 90 ohms, with 100 ohms as the nearest safe standard value.
Back to Sensor Circuits: Switching and Interface Safety: GPIO Load Safety