Check: Complete Interface Margin

Knowledge check · self-test
Check: Complete Interface Margin
You now know: The 47 kOhm pull-up keeps the rain detector under the 0.5 mA budget while producing 3.15 V dry, 2.24 V light rain, and 0.58 V heavy rain. The selected 10 kOhm and 1 uF RC filter has a 16 Hz cutoff and reduces 20 kHz motor noise by 62 dB. The illustrative 20 mA relay driver uses a 1 kOhm base resistor; verify GPIO, transistor, relay, and flyback diode ratings for the actual parts. Label the Diagram. Follow the signal from input to switch and load before identifying each part. Code Challenge. The code must read the input and drive the output safely. Use the challenge to check that sequence.
You now know: The 47 kOhm pull-up keeps the rain detector under the 0.5 mA budget while producing 3.15 V dry, 2.24 V light rain, and 0.58 V heavy rain. The selected 10 kOhm and 1 uF RC filter has a 16 Hz cutoff and reduces 20 kHz motor noise by 62 dB. The illustrative 20 mA relay driver uses a 1 kOhm base resistor; verify GPIO, transistor, relay, and flyback diode ratings for the actual parts. Label the Diagram. Follow the signal from input to switch and load before identifying each part. Code Challenge. The code must read the input and drive the output safely. Use the challenge to check that sequence.
Back to Sensor Circuits: Switching and Interface Safety: Complete Interface Margin