Skip to content

Check: Divider and circuit-pattern decisions

Knowledge check · self-test

Check: Divider and circuit-pattern decisions

Sensor placement and the fixed resistor determine whether the divider voltage rises or falls as the sensed resistance changes, and how much of the supply span it uses. The examples below compare that direction and usable voltage range. You now know: - A voltage divider turns resistance into ADC voltage: two equal 10 kOhm resistors on 3.3 V sit at 1.65 V. - Sensor placement matters: the LDR-on-top example moves from 3.24 V in bright light toward 1.65 V in darkness. - Resistor choice affects usable range: the 1 kOhm top resistor option gives a 2.45 V span, about 74% of the ADC range.

Back to the chapter →

Sensor placement and the fixed resistor determine whether the divider voltage rises or falls as the sensed resistance changes, and how much of the supply span it uses. The examples below compare that direction and usable voltage range. You now know: - A voltage divider turns resistance into ADC voltage: two equal 10 kOhm resistors on 3.3 V sit at 1.65 V. - Sensor placement matters: the LDR-on-top example moves from 3.24 V in bright light toward 1.65 V in darkness. - Resistor choice affects usable range: the 1 kOhm top resistor option gives a 2.45 V span, about 74% of the ADC range.

Back to Sensor Circuits: Dividers and Filtering: Turn Resistance into Voltage