Skip to content

Check: source and architecture decisions

Knowledge check · self-test

Check: source and architecture decisions

Checkpoint: Architecture Fit Before choosing parts, name the source condition you measured, the converter start point, the storage autonomy target, and the load state that can be reduced when energy is scarce. A design that cannot fill those four slots is still a concept sketch, not a harvesting architecture. Checkpoint: Source Evidence Do not compare sources by name alone. Outdoor solar needs worst-month harvest and autonomy evidence, indoor light needs an occupied and unoccupied lux or panel-output record, TEGs need measured delta-T across the module, vibration needs a mounted acceleration spectrum, and RF needs received-power and duty-cycle evidence near the intended source.

Back to the chapter →

Checkpoint: Architecture Fit Before choosing parts, name the source condition you measured, the converter start point, the storage autonomy target, and the load state that can be reduced when energy is scarce. A design that cannot fill those four slots is still a concept sketch, not a harvesting architecture. Checkpoint: Source Evidence Do not compare sources by name alone. Outdoor solar needs worst-month harvest and autonomy evidence, indoor light needs an occupied and unoccupied lux or panel-output record, TEGs need measured delta-T across the module, vibration needs a mounted acceleration spectrum, and RF needs received-power and duty-cycle evidence near the intended source.

Back to Energy Harvesting: Budgets, Conversion, and Storage: Return to harvesting budgets