Check the power path
Review the sensor signal path.
::: {.callout-tip} ##
Checkpoint: Signal Path {.depth-l0 data-narration="suspended-until-rerecord"}
A sensor signal crosses several stages before it becomes a message. Check the voltage range and the ADC reference at the boundary, then retain the calibration used to interpret the code.
You now know:
- A sensor may output voltage, current, frequency, or digital data. An analog voltage sensor needs a suitable ADC path.
- Signal conditioning prepares the voltage for the ADC input range, such as 0-3.3V.
- A 12-bit ADC value like 4095 is not the end of the path; firmware still calibrates and transmits the result.
:::Back to Electronics for IoT: Signals and Calculators: Analog-to-Digital IoT Flow
