Skip to content

Check: Power demand and component roles

Knowledge check · self-test

Check: Power demand and component roles

Loads on the same rail draw currents that add. Compare their combined demand with the supply rating and then test the rail under load.

Back to the chapter →

Loads on the same rail draw currents that add. Compare their combined demand with the supply rating and then test the rail under load.

Average current helps estimate battery life, but the source must also handle the highest simultaneous load. A supply can meet the average and still sag during a peak. Check the LED branch and supply rating separately:

  • For an LED with a 20 mA target on a 3.3 V rail and a 2 V forward drop, the resistor drops 1.3 V; 68 ohms gives about 19 mA.
  • A 500 mA supply cannot carry 200 mA and 350 mA at the same time without exceeding its rating.
  • Battery and power-path choices depend on average current, sleep behavior, and whether an LDO or buck converter wastes less energy.

Back to Electronics for IoT: Power and Switching: Drive a Relay with Base Current