Check: Sampling and retention

Knowledge check · self-test
Check: Sampling and retention
Check sampling and retention.
Check sampling and retention.
Checkpoint: Sampling Without Aliasing {.depth-l0}
You now know:
- Nyquist starts from the highest frequency of interest, so a 60 Hz motor with 4th-harmonic faults needs a 480 Hz minimum sample rate.
- The illustrative impulse example turns 1800 RPM into 30 Hz, then follows harmonics to 720 Hz before applying the 1440 Hz minimum and practical safety margin.
- The calculator and animation are sanity checks for the same rule: low sample rates create false low-frequency patterns, not trustworthy compression.
:::::: {.callout-tip}
##
Checkpoint: Reduce Before Transmit {.depth-l0}
You now know:
- Aggregation can replace 60 raw samples with 1 summary when min, max, mean, and count preserve the decision evidence.
- Transmission dominates many edge power budgets: the worked LoRa case moves from 35 days to 496 days by sending 4 summaries per hour.
- Buffer plans need peak-load math, including the 54,000-sample outage calculation, before teams trust compressed or tiered retention data.
:::Back to Edge Data: Sampling and Statistical Compression: Reduce Traffic Around the Decision