Check: Counted Motion

Knowledge check · self-test
Check: Counted Motion
You now know: - A common stepper gives 200 full steps per revolution, so one full step is 1.8 degrees. - With a 2 mm lead screw, one 200-step revolution moves 2 mm, so one full step moves 0.01 mm. - At 1/16 microstepping, the same 200-step motor exposes 3200 commanded microsteps per revolution, but torque margin still decides whether the load actually follows.
You now know: - A common stepper gives 200 full steps per revolution, so one full step is 1.8 degrees. - With a 2 mm lead screw, one 200-step revolution moves 2 mm, so one full step moves 0.01 mm. - At 1/16 microstepping, the same 200-step motor exposes 3200 commanded microsteps per revolution, but torque margin still decides whether the load actually follows.
Back to Stepper Motors: Drivers and Motion: H-Bridge Driver Boundary